Join DLMS

Working Groups

Working Groups can be created or dismantled at any time upon decision of the DLMS UA Board of Directors, with the aim of developing roadmaps for the DLMS UA Standard in a specific market area. Each Working Group reports to the DLMS UA Technical Board or the DLMS UA Qualification Board.

The creation of a new Working Group requires the participation of a total of 4 members among existing or new DLMS UA Members, with a status greater than or equal to Full Members, whereby at least 1 must be a Promoter Member acting as a sponsor and a second either a Promoter or Advanced Member. The newly created DLMS UA Working Group should be chaired by a Promoter or an Advanced Member.

About the DLMS UA Working Groups

DLMS Maintenance Working Group (MWG)

Responsible for the development and maintenance of the core DLMS/COSEM specification (Green Book & Blue Book) and ensure cross -working groups’ support.

Chairperson: Mr Milan Kozole (Iskraemeco) - L_moc__smld--riahc__GWM

Secretary: Mr Lee Gould - L_moc__smld--yraterces__GWM

 


DLMS Qualification Board (including Qualification Working Group)

Responsible for the development of the test plans (Yellow Book), the test tools, and golden devices and overarching responsibility for the Qualification Process used by members to obtain the certification for their products.

Chairperson: Mr Giovanni Riboldi (Vivavis) - L_moc__smld--riahc__GWQ

Secretary: Dr Chris Fitzer - L_moc__smld--yraterces__GWQ


 
DLMS Health Usage Monitoring Systems Working Group (HUMSWG)

Responsible for protocols and Generic Companion Profiles associated with connected measuring and monitoring remote devices used in Energy & Water strategic infrastructures.

Chairperson: Mr Emilio Consonni (Itron) - L_moc__smld--riahc__GWSMUH

Secretary: Dr Chris Fitzer - L_moc__smld--yraterces__GWSMUH



DLMS Electric Vehicle Charging Stations Working Group (EVCSWG)

Responsible for the development of protocols and Generic Companion Profile embedded into public and residential e-mobility charging stations

Chairperson: Mr Toufann Chaudhuri (Eaton) - L_moc__smld--riahc__GWSCVE

Secretary: Dr Chris Fitzer - L_moc__smld--yraterces__GWSCVE



DLMS Smart Metering Working Group (SMWG)

Responsible for the development of protocols and Generic Companion Profiles for Energy & Water metering devices.

Chairperson: Mr Pieter Coetzee (Itron) - L_moc__smld--riahC__GWMS

Secretary: Dr Chris Fitzer - L_moc__smld--yraterces__GWMS


The Smart Metering Working Group comprises of 4 additional sub-Working Groups that each focus on a specific market.

Electrical Energy Smart Meter Sub Working Group

In addition to responsibilities for the definition of the Electrical Smart Meter Generic Companion Profiles, this Working Group is also responsible for the Multi-Utility Gateway

Chairperson: Mr Klemen Belec (Iskrameco) - L_moc__smld--riahc__gwsmsee

Secretary: Dr Chris Fitzer - L_moc__smld--yraterces__gwsmsee 



Gas Smart Meter Sub Working Group


Chairperson: Mr Tony Field (Itron) - L_moc__smld--riahc__gwsmsg

Secretary: Mr Andrew Smith - L_moc__smld--yraterces__gwsmsg


Water Smart Meter Sub Working Group

Chairperson: Mr Ya Chen (Kaifa) - L_moc__smld--riahc__gwsmsw

Secretary: Mr Andrew Smith -  L_moc__smld--yraterces__gwsmsw


Heat Smart Meter Sub Working Group

Chairperson: TBD - L_moc__smld--riahc__gwsmsh

Secretary: Mr Andrew Smith - L_moc__smld--yraterces__gwsmsh

 

DLMS Edge Gateway Working Group

Responsible for the development of protocols, architectures and Generic Companion Profile for the Edge Gateway.

Chairperson: Mr John Doyle (Itron) - L_moc__smld--riahc__gwge

Secretary: Dr Chris Fitzer - L_moc__smld--yraterces__gwge